HOW TO PRINTER TAKING CARE

1. Use the printer periodicallyIn order for optimum print quality, use your printer periodically at least 2-3 times a week. This will make the flow of ink from the hole remains current.
2. Turn the printer off when not in useDo not forget to always turn off the printer when not in use. This will prevent the closing holes in the head printer ink flow.
3. Clean the dirt that is in the printerEvery one or two weeks, clean the inside of the printer. It is necessary to maintain the ability of the printer in print. Do not store the printer in dusty or full of insects. If necessary, the printer with plastic wrap to avoid dirt.
4. Keep the cartridge conditionBecause the cartridges were filled with fine electrical connector and will have an impact on the print, cartridge always treat with caution. Including while changing ink.
5. Use of Diagnostic ToolsGenerally, all printers have software on how to treat or solve a problem concerning the printer. Learn software because it may be the information provided can help you overcome problems in the printer.
6. Turn off the printer if it fails to printSometimes, failure in the print can be overcome by turning off the printer button, then pull the power cord. After ten minutes, insert the power cord at the plug, turn on the printer and try printing again.

Source: Klasika Kompas 8 Mei 2008